Hi, interesting topic. I believe that three people here in .CI have 3D printers, and with a bit of time can swap over the
filament to one with the correct thermal profile.
The "brass" filament might actually work as looked into this for a casemod on my smartphone neural net project.
-Andre
From: volt-nuts volt-nuts-bounces@lists.febo.com on behalf of Don@True-Cal truecalservices@gmail.com
Sent: 30 July 2018 01:19
To: Volt-Nuts
Subject: [volt-nuts] LTZ1000 Thermal Case
I recall a discussion about someone wanting to make, mold or thermal print
the thermal case for the LTZ1000 like the ones used on the 3458A. Did anyone
do this or is there a source of acquiring 1 or 2 of these for a project I'm
working on. Thanks, Don
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
Hi, interesting topic. I believe that three people here in .CI have 3D printers, and with a bit of time can swap over the
filament to one with the correct thermal profile.
The "brass" filament might actually work as looked into this for a casemod on my smartphone neural net project.
-Andre
________________________________________
From: volt-nuts <volt-nuts-bounces@lists.febo.com> on behalf of Don@True-Cal <truecalservices@gmail.com>
Sent: 30 July 2018 01:19
To: Volt-Nuts
Subject: [volt-nuts] LTZ1000 Thermal Case
I recall a discussion about someone wanting to make, mold or thermal print
the thermal case for the LTZ1000 like the ones used on the 3458A. Did anyone
do this or is there a source of acquiring 1 or 2 of these for a project I'm
working on. Thanks, Don
_______________________________________________
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
