Hi all, I was wondering if anyone makes a nice, complete unit from one of Tom's PICDivs; preferably with an external 10MHz input, a 10MHz output and a 1PPS output?  It would be nice if it also accepted a 1PPS in to sync the PIC's output to an external 1PPS source, but that's not a necessity.  I've got something kludged together here that I can drive from my Cs standard for testing, but I was hoping for something a bit more purpose made if anyone makes one?  Not looking for a kit or just a board, nor do I have any interest in making/marketing such a unit. Bob ----------------------------------------------------------------- AE6RV.com GFS GPSDO list: groups.yahoo.com/neo/groups/GFS-GPSDOs/info

Hi Bob -- TAPR has two boards that provide life support for Tom's PICDiv chips: The "TADD-2" is a six-channel divider allowing each channel to have its rate independently set from a common source: https://www.tapr.org/kits_tadd-2.html The "T2-Mini" is a tiny board that provides a single channel of PPS (or whatever you want) from an RF input: https://www.tapr.org/kits_t2-mini.html John ---- On 1/5/2017 12:34 AM, Bob Stewart wrote: > Hi all, > I was wondering if anyone makes a nice, complete unit from one of Tom's PICDivs; preferably with an external 10MHz input, a 10MHz output and a 1PPS output? It would be nice if it also accepted a 1PPS in to sync the PIC's output to an external 1PPS source, but that's not a necessity. I've got something kludged together here that I can drive from my Cs standard for testing, but I was hoping for something a bit more purpose made if anyone makes one? Not looking for a kit or just a board, nor do I have any interest in making/marketing such a unit. > > Bob ----------------------------------------------------------------- > AE6RV.com > > GFS GPSDO list: > groups.yahoo.com/neo/groups/GFS-GPSDOs/info > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >

Sorry, I missed the "complete unit" part... the TAPR products do require some soldering. The TADD-2 does have a case available if that helps. John ---- On 1/5/2017 8:21 AM, John Ackermann N8UR wrote: > Hi Bob -- > > TAPR has two boards that provide life support for Tom's PICDiv chips: > > The "TADD-2" is a six-channel divider allowing each channel to have its > rate independently set from a common source: > https://www.tapr.org/kits_tadd-2.html > > The "T2-Mini" is a tiny board that provides a single channel of PPS (or > whatever you want) from an RF input: > https://www.tapr.org/kits_t2-mini.html > > John > ---- > > > On 1/5/2017 12:34 AM, Bob Stewart wrote: >> Hi all, >> I was wondering if anyone makes a nice, complete unit from one of >> Tom's PICDivs; preferably with an external 10MHz input, a 10MHz output >> and a 1PPS output? It would be nice if it also accepted a 1PPS in to >> sync the PIC's output to an external 1PPS source, but that's not a >> necessity. I've got something kludged together here that I can drive >> from my Cs standard for testing, but I was hoping for something a bit >> more purpose made if anyone makes one? Not looking for a kit or just >> a board, nor do I have any interest in making/marketing such a unit. >> >> Bob ----------------------------------------------------------------- >> AE6RV.com >> >> GFS GPSDO list: >> groups.yahoo.com/neo/groups/GFS-GPSDOs/info >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.