Yes,  the next release (should be out in a couple of weeks) supports numerous receiver types.  Included are:

Native binary formats:
Trimble TSIP devices - (Thunderbolts, Resolution T family, various telecom GPSDOs like the NTWB, NTPX, etc)
Datum Starloc II (ugh!)
Ublox
Motorola (6, 8, 12 channel)
Sirf
Venus
Jupiter
NVS

SCPI devices (tested):
Z3801A
Z3812A (and related Lucent GPSDO's)
UCCM devices (Trimble and Symmetricom telecom GPSDO's - SCPI like)
SCPI mode for Trimble telecom GPSDO's like the NTBW, NTPX, etc

SCPI devices (untested... if you have one and can compile a Linux program email me...)
HP 53xxxx
Z3805, Z3810. Z3816, etc
Lucent KSxxxx

The following devices in a monitoring mode:
NMEA receivers
GPSD (a universal GPS device interface for Linux)
Receiver-less, operating system clock driven mode.

The next release has support for OS/X in it... if you can compile a C program for OS/X and are familiar with or would like to be familiar with  X11 / XQuartz under OS/X) email me, I've lost contact with my OS/X guy).  Also it works great with the Raspberry PI's...

that it supports "most GPS receivers" but I have not heard that it
supports the Z3801A. It would be great if it can do this...

Curious if the code for the z3801 was ever released?
Thanks
Paul
WB8TSL

On Mon, Sep 19, 2016 at 8:08 AM, Bill Riches bill.riches@verizon.net
wrote:

Hi

None of the code for any of these devices was ever “released” by it’s owners /
creators. It appears that in many cases, the code in parts currently shipping is very
similar to the code from decades ago …thus their reluctance to release the old code.

Oddly enough some of the code is indeed out there on the net by virtue of various
people doing things to pull it out of the memory chips it’s stored in. A review of the
Time Nut archives has a number of bread crumbs that lead one off to various likely
locations to find it. I suspect that the big guys are not to excited about the code dumps
so being really public about it may not be a real good idea.

Bob

Hi Paul,

Our LH Guru is working on an update for 3801 and 3811.  It will do all sort of things and even cook dinner.  He has not said when it will be available but it will be soon.

73,

Bill, WA2DVU
Cape May

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of paul swed
Sent: Wednesday, November 23, 2016 9:50 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Lady Heather for Z3801A (and other devices)

Curious if the code for the z3801 was ever released?
Thanks
Paul
WB8TSL

On Mon, Sep 19, 2016 at 8:08 AM, Bill Riches bill.riches@verizon.net
wrote:

time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Bob,
Thank you for the insight. When I was reading the thread about 2 months ago
I was thinking this was official. (As far as it gets) OK can that thought.
Would have been great to have the TBolt and Z3801 working.
Regards
Paul
WB8TSL

On Wed, Nov 23, 2016 at 10:25 AM, Bob Camp kb8tq@n1k.org wrote:

Hi

Code as in firmware inside the Z3801 (the question I answered) or as in LH
(the question I didn’t answer).

Bob