Received a note from John Koster, W9DDD that TAPR had one complete GPS kit left.
https://www.tapr.org/gps_exp-kit.html
Received #CAB083 (2.1mm DC Barrel Jack to Bare Wire/"Pigtail") this morning via AirMail.
https://www.moddiy.com/products/2.1mm-DC-Barrel-Jack-to-Bare-Wire-%28Open-End%29.html
Took about 10 minutes to finish building 2 adapter cables for the two kits.
I will have to post photos.
I used an old Linksys router power adapter (12VDC, 1A) for power and an old Motorola ANT62301 "HockeyPuck" antenna (Marine screw-base) on the patio (some obstructions).
http://www.dvq.com/stan/041127/TN-491B-motorola-gps-antenna.pdf
I could not get TAPR/CNS Systems TAC32 software to work under latest update of Windows 10 (I'll have to ask Rick, W2GPS about that).
Lady Heather, version 5 came to the rescue (Thank you Mark Sims).
Lady Heather recognized the Motorola M12 receiver quickly.
I performed a Hardware Reset and then started the Standard Survey.
After about 10 minutes it was tracking, and continuing survey.
greg, w9gb
Sent from iPad Air
Greg, Funny. Some of the lucent boxes have been in strange places as well. Can you please check your PPS to see if you get a signal when in that other mode (where it needs at least one sat locked)?
On Jun 2, 2017, at 5:13 PM, Gregory Beat w9gb@icloud.com wrote:
Received a note from John Koster, W9DDD that TAPR had one complete GPS kit left.
https://www.tapr.org/gps_exp-kit.html
Received #CAB083 (2.1mm DC Barrel Jack to Bare Wire/"Pigtail") this morning via AirMail.
https://www.moddiy.com/products/2.1mm-DC-Barrel-Jack-to-Bare-Wire-%28Open-End%29.html
Took about 10 minutes to finish building 2 adapter cables for the two kits.
I will have to post photos.
I used an old Linksys router power adapter (12VDC, 1A) for power and an old Motorola ANT62301 "HockeyPuck" antenna (Marine screw-base) on the patio (some obstructions).
http://www.dvq.com/stan/041127/TN-491B-motorola-gps-antenna.pdf
I could not get TAPR/CNS Systems TAC32 software to work under latest update of Windows 10 (I'll have to ask Rick, W2GPS about that).
Lady Heather, version 5 came to the rescue (Thank you Mark Sims).
Lady Heather recognized the Motorola M12 receiver quickly.
I performed a Hardware Reset and then started the Standard Survey.
After about 10 minutes it was tracking, and continuing survey.
greg, w9gb
Sent from iPad Air
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.