Thanks in advance for any help.
Skip Withrow

Skip - The Trimble Acutime 2000 outdoor antenna http://www.n4iqt.com/trimble/Acutime2000.pdf looks identical to the Trimble Palisade GPS antenna. http://dc2light.co.uk/PALISADE-Manual.zip Mark, GM4ISM had surplus Palisade antennas, at one time. He noted differential RS-422 configuration and TSIP output. He has Trimble programs on his web page. http://dc2light.co.uk/GPS_ref.htm Andy, G4JNT wrote a PIC conversion (Trimble—> NEMA) for Mark’s project. http://www.g4jnt.com/pics.htm Palisade uses Deutsch IMC-200 12-pin circular connector, part number: IMC26-2212 http://uk.farnell.com/deutsch/imc26-2212x/plug-in-line-12-way/dp/1019239 greg, w9gb ==Original Message== From: Skip Withrow <skip.withrow@gmail.com> To: time-nuts <time-nuts@febo.com> Subject: [time-nuts] Looking for Datum TymServe 2000 (TS2000) manual Hello Time-Nuts, After a very long journey trying to figure out the correct cable configuration between the AcuTime GPS antenna (receiver) and a Datum TS2000 I now have it working. Now I am in need of a manual so I can talk over the serial port. The protocol is apparently not the same as the TS2100. I'm more than happy to share the cable schematic if anyone needs it. It would be the same for Bancomm bc627 and 635/7 (?) as well as the TS2000. If you have any of these units you could probably use many different Trimble receivers (Resolution-T for instance) with RS-422 converter (though I have not tried it - yet). Thanks in advance for any help. Skip Withrow ==