Empathy List Archives

DC

David C. Partridge

Tue, Jul 18, 2017 5:45 PM

Are you interested in purchasing extenders for a Datron 4800 series
calibrator? If so I'm considering getting some made up.

Price will depend on how much interest and they won't be small PCBs. By way
of guidance, back in 2011 I had 25 extenders of a similar size to the large
boards made and the unit cost was USD28.

Let me know if you are interested.

Cheers
Dave

Are you interested in purchasing extenders for a Datron 4800 series calibrator? If so I'm considering getting some made up. Price will depend on how much interest and they won't be small PCBs. By way of guidance, back in 2011 I had 25 extenders of a similar size to the large boards made and the unit cost was USD28. Let me know if you are interested. Cheers Dave

DM

Dan McAlexander

Tue, Jul 18, 2017 8:51 PM

Hi Dave

I would be interested in a set thanks for putting that out there.

Have a good one

Dan

From: volt-nuts volt-nuts-bounces@febo.com on behalf of David C. Partridge david.partridge@perdrix.co.uk
Sent: Tuesday, July 18, 2017 12:45 PM
To: 'Discussion of precise voltage measurement'
Subject: [volt-nuts] Extenders for the Datron 4800 series of calibrators?

Are you interested in purchasing extenders for a Datron 4800 series
calibrator? If so I'm considering getting some made up.

Price will depend on how much interest and they won't be small PCBs. By way
of guidance, back in 2011 I had 25 extenders of a similar size to the large
boards made and the unit cost was USD28.

Let me know if you are interested.

Cheers
Dave

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
volt-nuts Info Page - American Febo Enterpriseshttps://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
www.febo.com
volt-nuts is a low volume, high SNR list for the discussion of precise voltage measurement and related topics. To see the collection of prior postings to the list ...

and follow the instructions there.

Hi Dave I would be interested in a set thanks for putting that out there. Have a good one Dan ________________________________ From: volt-nuts <volt-nuts-bounces@febo.com> on behalf of David C. Partridge <david.partridge@perdrix.co.uk> Sent: Tuesday, July 18, 2017 12:45 PM To: 'Discussion of precise voltage measurement' Subject: [volt-nuts] Extenders for the Datron 4800 series of calibrators? Are you interested in purchasing extenders for a Datron 4800 series calibrator? If so I'm considering getting some made up. Price will depend on how much interest and they won't be small PCBs. By way of guidance, back in 2011 I had 25 extenders of a similar size to the large boards made and the unit cost was USD28. Let me know if you are interested. Cheers Dave _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts volt-nuts Info Page - American Febo Enterprises<https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts> www.febo.com volt-nuts is a low volume, high SNR list for the discussion of precise voltage measurement and related topics. To see the collection of prior postings to the list ... and follow the instructions there.

TK

Tom Knox

Wed, Jul 19, 2017 3:42 AM

Hi Dave;

Count me in.

Cheers;

Thomas Knox
Sr Test and Measurement Engineer
Ascent Concepts and Technology
4475 Whitney Place
Boulder Colorado 80305
1-303-554-0307
actast@hotmail.com

From: volt-nuts volt-nuts-bounces@febo.com on behalf of David C. Partridge david.partridge@perdrix.co.uk
Sent: Tuesday, July 18, 2017 11:45 AM
To: 'Discussion of precise voltage measurement'
Subject: [volt-nuts] Extenders for the Datron 4800 series of calibrators?

Are you interested in purchasing extenders for a Datron 4800 series
calibrator? If so I'm considering getting some made up.

Price will depend on how much interest and they won't be small PCBs. By way
of guidance, back in 2011 I had 25 extenders of a similar size to the large
boards made and the unit cost was USD28.

Let me know if you are interested.

Cheers
Dave

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
volt-nuts Info Page - American Febo Enterpriseshttps://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
www.febo.com
volt-nuts is a low volume, high SNR list for the discussion of precise voltage measurement and related topics. To see the collection of prior postings to the list ...

and follow the instructions there.

Hi Dave; Count me in. Cheers; Thomas Knox Sr Test and Measurement Engineer Ascent Concepts and Technology 4475 Whitney Place Boulder Colorado 80305 1-303-554-0307 actast@hotmail.com ________________________________ From: volt-nuts <volt-nuts-bounces@febo.com> on behalf of David C. Partridge <david.partridge@perdrix.co.uk> Sent: Tuesday, July 18, 2017 11:45 AM To: 'Discussion of precise voltage measurement' Subject: [volt-nuts] Extenders for the Datron 4800 series of calibrators? Are you interested in purchasing extenders for a Datron 4800 series calibrator? If so I'm considering getting some made up. Price will depend on how much interest and they won't be small PCBs. By way of guidance, back in 2011 I had 25 extenders of a similar size to the large boards made and the unit cost was USD28. Let me know if you are interested. Cheers Dave _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts volt-nuts Info Page - American Febo Enterprises<https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts> www.febo.com volt-nuts is a low volume, high SNR list for the discussion of precise voltage measurement and related topics. To see the collection of prior postings to the list ... and follow the instructions there.

volt-nuts@lists.febo.com

Extenders for the Datron 4800 series of calibrators?