I have a Trimble receiver 37426-61 that I would like to see if it works.
Does anyone have the pinout information for the Trimble 7 pin interface?
The date code is 9905.
This receiver is no longer in Trimble's database.
Sure glad my doctor does not dump my records when I get that old.
I would suspect that due to lack of foresite that this receiver will
have a Y2K problem as it was build just before the turn of the century.
I would also suspect that it will have a week 1024 rollover problem.
Any help appreciated.
73
Glenn
WB4UIV
HI Glenn...
I think I have something for you, but I am traveling and it isn't on my laptop. I will look for it next week when I get home. It was the installation manual and has the pinout you need.
Tom Holmes, N8ZM
-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Glenn Little WB4UIV
Sent: Monday, September 12, 2016 5:34 PM
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Subject: [time-nuts] Trimble receiver 37426-61
I have a Trimble receiver 37426-61 that I would like to see if it works.
Does anyone have the pinout information for the Trimble 7 pin interface?
The date code is 9905.
This receiver is no longer in Trimble's database.
Sure glad my doctor does not dump my records when I get that old.
I would suspect that due to lack of foresite that this receiver will
have a Y2K problem as it was build just before the turn of the century.
I would also suspect that it will have a week 1024 rollover problem.
Any help appreciated.
73
Glenn
WB4UIV