Greetings Dave,
While I do not know the Austron 1100 oscillators, I have experience of Austron 1120 oscillators. I suspect the 1100 and 1120 are very similar. I am sending a data sheet for the 1120 and an operating spec for the 1120 L. Note that the 1120Ls does not have varicap fine frequency trimming. Austron were consistent with the pin-out for IO plug-in oscillators. The 1120s have soldered base to can joints and I have successfully take them apart for repair (extra capacitance!). The 1120s are very good.
Regards,
Roger T.
On Fri, 30 Jun 2017 12:14:14 -0500, "Dave M" dgminala@mediacombb.net wrote:
Greetings Dave,
While I do not know the Austron 1100 oscillators, I have experience of Austron 1120 oscillators. I suspect the 1100 and 1120 are very similar. I am sending a data sheet for the 1120 and an operating spec for the 1120 L. Note that the 1120Ls does not have varicap fine frequency trimming. Austron were consistent with the pin-out for IO plug-in oscillators. The 1120s have soldered base to can joints and I have successfully take them apart for repair (extra capacitance!). The 1120s are very good.
Regards,
Roger T.
On Fri, 30 Jun 2017 12:14:14 -0500, "Dave M" <dgminala@mediacombb.net> wrote:
> Does anyone have any data on the Austron 1100-1 5MHz OXCO? Pinout & specs
> would be great.
>
> Thanks!
> Dave M
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
