time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

15 v power supplies

C/
Chuck / Judy Burch
Sat, Aug 12, 2017 5:25 PM

I have acquired a number of used Philips PE 1251 15 volt dc, 2 amp power
supplies.  They are high quality (over-engineered), 8" wide, 3.5" tall,
2.5" deep and weigh 3.6 lbs.  Output ripple plus noise is <= 0.1 millivolt.

I am making these available to fellow time nuts for $10 each plus
at-cost shipping.  Contact me off-line for photos or more information.

Chuck

I have acquired a number of used Philips PE 1251 15 volt dc, 2 amp power supplies. They are high quality (over-engineered), 8" wide, 3.5" tall, 2.5" deep and weigh 3.6 lbs. Output ripple plus noise is <= 0.1 millivolt. I am making these available to fellow time nuts for $10 each plus at-cost shipping. Contact me off-line for photos or more information. Chuck
PS
paul swed
Sat, Aug 12, 2017 6:01 PM

Chuck I looked them up out of curiosity.
For time nuts these are linear supplies. Not switchers.
As Chuck says quieter.
A note. Since these are linear you need to set the straps for 120V par or
220Vac ser.
Regards
Paul
WB8TSL

On Sat, Aug 12, 2017 at 1:25 PM, Chuck / Judy Burch ciandjaburch@gmail.com
wrote:

I have acquired a number of used Philips PE 1251 15 volt dc, 2 amp power
supplies.  They are high quality (over-engineered), 8" wide, 3.5" tall,
2.5" deep and weigh 3.6 lbs.  Output ripple plus noise is <= 0.1 millivolt.

I am making these available to fellow time nuts for $10 each plus at-cost
shipping.  Contact me off-line for photos or more information.

Chuck


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/m
ailman/listinfo/time-nuts
and follow the instructions there.

Chuck I looked them up out of curiosity. For time nuts these are linear supplies. Not switchers. As Chuck says quieter. A note. Since these are linear you need to set the straps for 120V par or 220Vac ser. Regards Paul WB8TSL On Sat, Aug 12, 2017 at 1:25 PM, Chuck / Judy Burch <ciandjaburch@gmail.com> wrote: > > I have acquired a number of used Philips PE 1251 15 volt dc, 2 amp power > supplies. They are high quality (over-engineered), 8" wide, 3.5" tall, > 2.5" deep and weigh 3.6 lbs. Output ripple plus noise is <= 0.1 millivolt. > > I am making these available to fellow time nuts for $10 each plus at-cost > shipping. Contact me off-line for photos or more information. > > Chuck > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/m > ailman/listinfo/time-nuts > and follow the instructions there. >
C/
Chuck / Judy Burch
Wed, Aug 16, 2017 4:09 PM

I have a few of the Philips PE 1251 power supplies remaining, also one
Philips PE 1252 24 volt, 1.4 amp power supply with the same low ripple
plus noise.  Any or all for $10 each plus at-cost shipping.

Chuck

Subject: 15 v power supplies
Date: Sat, 12 Aug 2017 11:25:26 -0600
From: Chuck / Judy Burch ciandjaburch@gmail.com
To: time-nuts@febo.com

I have acquired a number of used Philips PE 1251 15 volt dc, 2 amp power
supplies.  They are high quality (over-engineered), 8" wide, 3.5" tall,
2.5" deep and weigh 3.6 lbs.  Output ripple plus noise is <= 0.1 millivolt.

I am making these available to fellow time nuts for $10 each plus
at-cost shipping.  Contact me off-line for photos or more information.

Chuck

I have a few of the Philips PE 1251 power supplies remaining, also one Philips PE 1252 24 volt, 1.4 amp power supply with the same low ripple plus noise. Any or all for $10 each plus at-cost shipping. Chuck Subject: 15 v power supplies Date: Sat, 12 Aug 2017 11:25:26 -0600 From: Chuck / Judy Burch <ciandjaburch@gmail.com> To: time-nuts@febo.com I have acquired a number of used Philips PE 1251 15 volt dc, 2 amp power supplies. They are high quality (over-engineered), 8" wide, 3.5" tall, 2.5" deep and weigh 3.6 lbs. Output ripple plus noise is <= 0.1 millivolt. I am making these available to fellow time nuts for $10 each plus at-cost shipping. Contact me off-line for photos or more information. Chuck