I left my copy of the Datron 4808 Reference with a company for scanning.  On
checking it after return, they somehow managed to lose one page of the
schematics.  They also hadn't scanned the page.

The missing page is page 11.4-5 which is the Reference Divider Assembly
Out/In Guard Interface and Watchdog schematic.

I have a low res scan of the schematics which I downloaded  from the
xdevs.com website, but to replace the missing page I would prefer a proper
scan in full size (17x11), 600 dpi, monochrome (not greyscale).

Is anyone able to assist please?

It turns out that the circuit for this part of both the 4708 and 4800 are
identical to that of the 4808, so if anyone has access to an original manual
for either of those, a scan of the relevant page at 600dpi, mono (not
greyscale), and full size would be most gratefully received.

Thanks again,
Dave

-----Original Message-----
From: volt-nuts [mailto:volt-nuts-bounces@lists.febo.com] On Behalf Of David
C. Partridge
Sent: 27 July 2018 10:00
To: volt-nuts@lists.febo.com
Subject: [volt-nuts] Scan of one page from the Datron 4808 Reference
Handbook?

I left my copy of the Datron 4808 Reference with a company for scanning.  On
checking it after return, they somehow managed to lose one page of the
schematics.  They also hadn't scanned the page.

The missing page is page 11.4-5 which is the Reference Divider Assembly
Out/In Guard Interface and Watchdog schematic.

I have a low res scan of the schematics which I downloaded  from the
xdevs.com website, but to replace the missing page I would prefer a proper
scan in full size (17x11), 600 dpi, monochrome (not greyscale).

Is anyone able to assist please?

volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.