Chris, I didn't see that anyone had answered your question about the XO unit running by itself. Yes, the XO unit is or was a hot standby for the rubidium unit. So it had to be able to function if there was a failure of the primary unit. Have you found the hook-up cable drawings on KO4BB's web site? On Jul 19, 2016 2:56 PM, "Richard W. Solomon" <w1ksz@earthlink.net> wrote: > Got it, many thanks. I have a pair of these, NIB, > time to hook them up. > > 73, Dick, W1KSZ > > -----Original Message----- > From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Artek > Manuals > Sent: Tuesday, July 19, 2016 1:11 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Lucent boxes > > Ahhh no ...I have the MANUALS page book marked > > try this one > > http://www.ko4bb.com/getsimple/index.php?id=manuals > > > > On 7/19/2016 2:49 PM, Richard W. Solomon wrote: > > This Home Page ?? > > > > http://www.ko4bb.com/getsimple/index.php?id=index-1 > > > > Don't see any search box there ??? > > > > 73, Dick, w1KSZ > > > > -----Original Message----- > > From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Artek > > Manuals > > Sent: Tuesday, July 19, 2016 10:19 AM > > To: Discussion of precise time and frequency measurement > > Subject: Re: [time-nuts] Lucent boxes > > > > Dick > > > > Not rocket science ...go to KO4BB main page and enter "RFTGm" > > > > In the search box > > > > Dave > > NR1DX > > > > On 7/19/2016 12:42 PM, Richard W. Solomon wrote: > >> KO4BB's site is massive, can you pin down the cable drawing ? > >> > >> Tnx, Dick, W1KSZ > >> > >> -----Original Message----- > >> From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of > >> Douglas Baker > >> Sent: Monday, July 18, 2016 2:39 PM > >> To: Discussion of precise time and frequency measurement > >> Subject: Re: [time-nuts] Lucent boxes > >> > >> Chris, > >> The RFTGm ("m" for miniature even though still a large box) is a later > version of the RFTG line. The XO unit houses the GPS receiver which is > essential for disciplining. Both boxes operate at 24 VDC and there is an > interface cable drawing on line at KO4BB's web site. Never tried to hook > them up together, but it might work. Maybe others here may know. Good > luck with it. > >> 73's Doug > >> On Jul 18, 2016 12:52 PM, "Chris Waldrup" <kd4pbj@gmail.com> wrote: > >> > >>> Hi Everyone, > >>> > >>> I have two Lucent RFTG boxes in my workshop. The XO is a loaner. > >>> I'm curious if they will interface with each other or (most likely) > >>> they are a different series as the interface connectors on each have > >>> a different number of pins. > >>> One is marked RFTG-u REF 0 > >>> The other is RFTGm-II-XO > >>> > >>> Thanks in advance. > >>> > >>> Chris > >>> KD4PBJ > >>> > >>> > >>> _______________________________________________ > >>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >>> and follow the instructions there. > >>> > >> _______________________________________________ > >> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> and follow the instructions there. > >> > >> _______________________________________________ > >> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> and follow the instructions there. > >> > > > > > > -- > > Dave > > Manuals@ArtekManuals.com > > www.ArtekManuals.com > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > -- > Dave > Manuals@ArtekManuals.com > www.ArtekManuals.com > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >

I sure did. Thank you for the follow up. I really appreciate it. Chris KD4PBJ > On Jul 19, 2016, at 21:16, Douglas Baker <kfourcle@gmail.com> wrote: > > Chris, > I didn't see that anyone had answered your question about the XO unit > running by itself. Yes, the XO unit is or was a hot standby for the > rubidium unit. So it had to be able to function if there was a failure of > the primary unit. > Have you found the hook-up cable drawings on KO4BB's web site? >> On Jul 19, 2016 2:56 PM, "Richard W. Solomon" <w1ksz@earthlink.net> wrote: >> >> Got it, many thanks. I have a pair of these, NIB, >> time to hook them up. >> >> 73, Dick, W1KSZ >> >> -----Original Message----- >> From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Artek >> Manuals >> Sent: Tuesday, July 19, 2016 1:11 PM >> To: Discussion of precise time and frequency measurement >> Subject: Re: [time-nuts] Lucent boxes >> >> Ahhh no ...I have the MANUALS page book marked >> >> try this one >> >> http://www.ko4bb.com/getsimple/index.php?id=manuals >> >> >> >>> On 7/19/2016 2:49 PM, Richard W. Solomon wrote: >>> This Home Page ?? >>> >>> http://www.ko4bb.com/getsimple/index.php?id=index-1 >>> >>> Don't see any search box there ??? >>> >>> 73, Dick, w1KSZ >>> >>> -----Original Message----- >>> From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Artek >>> Manuals >>> Sent: Tuesday, July 19, 2016 10:19 AM >>> To: Discussion of precise time and frequency measurement >>> Subject: Re: [time-nuts] Lucent boxes >>> >>> Dick >>> >>> Not rocket science ...go to KO4BB main page and enter "RFTGm" >>> >>> In the search box >>> >>> Dave >>> NR1DX >>> >>>> On 7/19/2016 12:42 PM, Richard W. Solomon wrote: >>>> KO4BB's site is massive, can you pin down the cable drawing ? >>>> >>>> Tnx, Dick, W1KSZ >>>> >>>> -----Original Message----- >>>> From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of >>>> Douglas Baker >>>> Sent: Monday, July 18, 2016 2:39 PM >>>> To: Discussion of precise time and frequency measurement >>>> Subject: Re: [time-nuts] Lucent boxes >>>> >>>> Chris, >>>> The RFTGm ("m" for miniature even though still a large box) is a later >> version of the RFTG line. The XO unit houses the GPS receiver which is >> essential for disciplining. Both boxes operate at 24 VDC and there is an >> interface cable drawing on line at KO4BB's web site. Never tried to hook >> them up together, but it might work. Maybe others here may know. Good >> luck with it. >>>> 73's Doug >>>>> On Jul 18, 2016 12:52 PM, "Chris Waldrup" <kd4pbj@gmail.com> wrote: >>>>> >>>>> Hi Everyone, >>>>> >>>>> I have two Lucent RFTG boxes in my workshop. The XO is a loaner. >>>>> I'm curious if they will interface with each other or (most likely) >>>>> they are a different series as the interface connectors on each have >>>>> a different number of pins. >>>>> One is marked RFTG-u REF 0 >>>>> The other is RFTGm-II-XO >>>>> >>>>> Thanks in advance. >>>>> >>>>> Chris >>>>> KD4PBJ >>>>> >>>>> >>>>> _______________________________________________ >>>>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>>> and follow the instructions there. >>>> _______________________________________________ >>>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>>> >>>> _______________________________________________ >>>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>> >>> >>> -- >>> Dave >>> Manuals@ArtekManuals.com >>> www.ArtekManuals.com >>> >>> --- >>> This email has been checked for viruses by Avast antivirus software. >>> https://www.avast.com/antivirus >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> >> >> -- >> Dave >> Manuals@ArtekManuals.com >> www.ArtekManuals.com >> >> --- >> This email has been checked for viruses by Avast antivirus software. >> https://www.avast.com/antivirus >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.