Does anyone have any technical info on a Vectron Laboratories 100MHz OCXO, model 724Y3067 (part number A61583-1) please? Can’t find a datasheet on the current Vectron Inc website and my Google-fu is weak today. Neil

On 8/8/17 11:04 PM, Neil Smith G4DBN wrote: > Does anyone have any technical info on a Vectron Laboratories 100MHz OCXO, model 724Y3067 (part number A61583-1) please? Can’t find a datasheet on the current Vectron Inc website and my Google-fu is weak today. > Neil > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > that doesn't resemble a standard vectron part number You might look at the CO-724 https://www.vectron.com/products/ocxo/co724725.htm I don't know if Y indicates the temperature range... probably a custom. FOr others in that series, the next two digits indicate the frequency stability - 58 -> 5E-8, 28 -> 2E-8, 17->1E-7 30 -> 3E-10? If you're looking at the one in the various online ads, the pinout is pretty different - this is almost certainly a custom. You could always send an email to Vectron

Thanks everyone for the swift and comprehensive response, the specific device was purchased by a friend who is building a copy of my 100MHz OCXO PLL using an HMC1031 and he wanted to check the voltage/frequency and power specs. I had tried their Twitter and the Contact Us on the Vectron website, but didn't get anything back so far. I'll pass on the info to my friend. Neil On Wed, 9 Aug 2017 08:07:28 -0700, jimlux wrote: > On 8/8/17 11:04 PM, Neil Smith G4DBN wrote: >> Does anyone have any technical info on a Vectron Laboratories 100MHz >> OCXO, model 724Y3067 (part number A61583-1) please? Can’t find a >> datasheet on the current Vectron Inc website and my Google-fu is weak >> today. >> Neil >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > that doesn't resemble a standard vectron part number > > You might look at the CO-724 > > https://www.vectron.com/products/ocxo/co724725.htm > > I don't know if Y indicates the temperature range... probably a > custom. > > FOr others in that series, the next two digits indicate the frequency > stability - 58 -> 5E-8, 28 -> 2E-8, 17->1E-7 > > 30 -> 3E-10? > > If you're looking at the one in the various online ads, the pinout is > pretty different - this is almost certainly a custom. > > You could always send an email to Vectron > >

Hi Actually it *is* a standard Vectron part number. Once an OEM placed an order, the specific part was issued a 4 digit “code”. That plus the base model number made up the part number from there on. On could debate endlessly if it was to make reordering easier (fewer digits to make mistakes on) or to obscure the actual spec. One advantage of the 4 digit approach would be if the customer decided they wanted some non-standard (weird lead lengths…) spec on their part. Bob > On Aug 9, 2017, at 11:07 AM, jimlux <jimlux@earthlink.net> wrote: > > On 8/8/17 11:04 PM, Neil Smith G4DBN wrote: >> Does anyone have any technical info on a Vectron Laboratories 100MHz OCXO, model 724Y3067 (part number A61583-1) please? Can’t find a datasheet on the current Vectron Inc website and my Google-fu is weak today. >> Neil >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > that doesn't resemble a standard vectron part number > > You might look at the CO-724 > > https://www.vectron.com/products/ocxo/co724725.htm > > I don't know if Y indicates the temperature range... probably a custom. > > FOr others in that series, the next two digits indicate the frequency stability - 58 -> 5E-8, 28 -> 2E-8, 17->1E-7 > > 30 -> 3E-10? > > If you're looking at the one in the various online ads, the pinout is pretty different - this is almost certainly a custom. > > You could always send an email to Vectron > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

On 8/9/17 10:44 AM, Bob kb8tq wrote: > Hi > > Actually it *is* a standard Vectron part number. Once an OEM placed an order, the specific part was issued > a 4 digit “code”. That plus the base model number made up the part number from there on. On could debate > endlessly if it was to make reordering easier (fewer digits to make mistakes on) or to obscure the actual spec. > One advantage of the 4 digit approach would be if the customer decided they wanted some non-standard > (weird lead lengths…) spec on their part. > I stand corrected - it's a "standard OEM style number" as opposed to a "standard catalog number" That's kind of what I figured, when Dave sent the 724Y Class S sheet.. > Bob > >> On Aug 9, 2017, at 11:07 AM, jimlux <jimlux@earthlink.net> wrote: >> >> On 8/8/17 11:04 PM, Neil Smith G4DBN wrote: >>> Does anyone have any technical info on a Vectron Laboratories 100MHz OCXO, model 724Y3067 (part number A61583-1) please? Can’t find a datasheet on the current Vectron Inc website and my Google-fu is weak today. >>> Neil >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >> that doesn't resemble a standard vectron part number >> >> You might look at the CO-724 >> >> https://www.vectron.com/products/ocxo/co724725.htm >> >> I don't know if Y indicates the temperature range... probably a custom. >> >> FOr others in that series, the next two digits indicate the frequency stability - 58 -> 5E-8, 28 -> 2E-8, 17->1E-7 >> >> 30 -> 3E-10? >> >> If you're looking at the one in the various online ads, the pinout is pretty different - this is almost certainly a custom. >> >> You could always send an email to Vectron >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >