jerry@hanler.com said: > Chris, I think you are onto something. Running Lady Heather on this unit I > see a line under “receiver” with the term “SawT” and a parameter of 24ns. > So if we combine this information with what you teach below, it’s starting > to look like maybe the M12 unit is doing something different than the > Lucent. The M12 is a timing receiver. The Lucent is a GPSDO. The Lucent will adjust the osc so it runs at 10 MHz and the phase is such that the PPS lines up with UTC. The M12 tells you the offset rather then adjusting the osc so the offset is 0. -- These are my opinions. I hate spam.

That makes complete sense, it’s not disciplining anything, just pumping out the PPS and reporting the variance. I don’t know why I didn’t think of it. It’s interesting how it jumps around from PPS to PPS. Thank you, Jerry > On Jun 7, 2017, at 2:57 AM, Hal Murray <hmurray@megapathdsl.net> wrote: > > > jerry@hanler.com said: >> Chris, I think you are onto something. Running Lady Heather on this unit I >> see a line under “receiver” with the term “SawT” and a parameter of 24ns. >> So if we combine this information with what you teach below, it’s starting >> to look like maybe the M12 unit is doing something different than the >> Lucent. > > The M12 is a timing receiver. The Lucent is a GPSDO. > > The Lucent will adjust the osc so it runs at 10 MHz and the phase is such > that the PPS lines up with UTC. > > The M12 tells you the offset rather then adjusting the osc so the offset is 0. > > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.