GB

Gregory Beat

Thu, Jun 29, 2017 5:05 PM

Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436 Ref-0 GPSDO project (standalone operation).

auction-1356761279.htm
"I'm selling this gear (Lucent) as I don't have the time to complete this project.
I bought everything included brand new, but I can't provide any warranty."
--amc184 (seller)

My June 6, 2017 query/update.

Starting in August 2015, Dan Watson (Sync Channel Blog) started a project to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u REF-0 for standalone operation (without the REF-1 module)
http://syncchannel.blogspot.com/2015/08/standalone-operation-of-lucent-ks-24361.html

By October, he had a GPS board (Tria) that converted uBlox timing receiver output to the format desired by Lucent box (Motorola Oncore UT).
http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html
His last post in November 2015 was about dongles for the REF-0.
http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-rev-b-dongles.html

In 2016 he posted his later development work on OSHPark, but stopped Blog posting about a year ago. Anyone have an update? He has commented in past that he is easily distracted.

greg, w9gb

Sent from iPad Air

Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436 Ref-0 GPSDO project (standalone operation). Earlier this week, I noted Lucent KS-2436 units being sold on the TradeMe web site (New Zealand). Listing: 1356761279 and 1356761447 http://www.trademe.co.nz/electronics-photography/other-electronics/other/auction-1356761279.htm "I'm selling this gear (Lucent) as I don't have the time to complete this project. I bought everything included brand new, but I can't provide any warranty." --amc184 (seller) === My June 6, 2017 query/update. -- Starting in August 2015, Dan Watson (Sync Channel Blog) started a project to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u REF-0 for standalone operation (without the REF-1 module) http://syncchannel.blogspot.com/2015/08/standalone-operation-of-lucent-ks-24361.html By October, he had a GPS board (Tria) that converted uBlox timing receiver output to the format desired by Lucent box (Motorola Oncore UT). http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html His last post in November 2015 was about dongles for the REF-0. http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-rev-b-dongles.html In 2016 he posted his later development work on OSHPark, but stopped Blog posting about a year ago. Anyone have an update? He has commented in past that he is easily distracted. greg, w9gb === Sent from iPad Air

PS

paul swed

Thu, Jun 29, 2017 6:31 PM

I think this was the same person that developed the arduino ref 0
standalone controller that was shared with time nuts. Essentially it faked
the ref 0 out and you could use any external GPS receiver tick to drive the
unit.
I tested numbers of arduinos. They all worked.

But your right he then moved on to building a internal GPS receiver and
though he built boards they were never completed or offered as I recall.
Regards
Paul
WB8TSL

On Thu, Jun 29, 2017 at 1:05 PM, Gregory Beat w9gb@icloud.com wrote:

Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436
Ref-0 GPSDO project (standalone operation).

Earlier this week, I noted Lucent KS-2436 units being sold on the TradeMe
web site (New Zealand). Listing: 1356761279 and 1356761447
http://www.trademe.co.nz/electronics-photography/other-
electronics/other/auction-1356761279.htm
"I'm selling this gear (Lucent) as I don't have the time to complete this
project.
I bought everything included brand new, but I can't provide any warranty."
--amc184 (seller)

My June 6, 2017 query/update.

Starting in August 2015, Dan Watson (Sync Channel Blog) started a project
to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u REF-0 for
standalone operation (without the REF-1 module)
http://syncchannel.blogspot.com/2015/08/standalone-
operation-of-lucent-ks-24361.html

By October, he had a GPS board (Tria) that converted uBlox timing receiver
output to the format desired by Lucent box (Motorola Oncore UT).
http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html
His last post in November 2015 was about dongles for the REF-0.
http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-rev-b-dongles.html

In 2016 he posted his later development work on OSHPark, but stopped Blog
posting about a year ago. Anyone have an update? He has commented in past
that he is easily distracted.

greg, w9gb

Sent from iPad Air

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/
mailman/listinfo/time-nuts
and follow the instructions there.

I think this was the same person that developed the arduino ref 0 standalone controller that was shared with time nuts. Essentially it faked the ref 0 out and you could use any external GPS receiver tick to drive the unit. I tested numbers of arduinos. They all worked. But your right he then moved on to building a internal GPS receiver and though he built boards they were never completed or offered as I recall. Regards Paul WB8TSL On Thu, Jun 29, 2017 at 1:05 PM, Gregory Beat <w9gb@icloud.com> wrote: > Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436 > Ref-0 GPSDO project (standalone operation). > > Earlier this week, I noted Lucent KS-2436 units being sold on the TradeMe > web site (New Zealand). Listing: 1356761279 and 1356761447 > http://www.trademe.co.nz/electronics-photography/other- > electronics/other/auction-1356761279.htm > "I'm selling this gear (Lucent) as I don't have the time to complete this > project. > I bought everything included brand new, but I can't provide any warranty." > --amc184 (seller) > === > My June 6, 2017 query/update. > -- > Starting in August 2015, Dan Watson (Sync Channel Blog) started a project > to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u REF-0 for > standalone operation (without the REF-1 module) > http://syncchannel.blogspot.com/2015/08/standalone- > operation-of-lucent-ks-24361.html > > By October, he had a GPS board (Tria) that converted uBlox timing receiver > output to the format desired by Lucent box (Motorola Oncore UT). > http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html > His last post in November 2015 was about dongles for the REF-0. > http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-rev-b-dongles.html > > In 2016 he posted his later development work on OSHPark, but stopped Blog > posting about a year ago. Anyone have an update? He has commented in past > that he is easily distracted. > > greg, w9gb > === > Sent from iPad Air > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. >

DW

Daniel Watson

Thu, Jun 29, 2017 11:31 PM

I don't live in New Zealand. :)

Dan

On Jun 29, 2017, at 1:05 PM, Gregory Beat w9gb@icloud.com wrote:

Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436 Ref-0 GPSDO project (standalone operation).

Earlier this week, I noted Lucent KS-2436 units being sold on the TradeMe web site (New Zealand). Listing: 1356761279 and 1356761447
http://www.trademe.co.nz/electronics-photography/other-electronics/other/auction-1356761279.htm
"I'm selling this gear (Lucent) as I don't have the time to complete this project.
I bought everything included brand new, but I can't provide any warranty."
--amc184 (seller)

My June 6, 2017 query/update.

Starting in August 2015, Dan Watson (Sync Channel Blog) started a project to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u REF-0 for standalone operation (without the REF-1 module)
http://syncchannel.blogspot.com/2015/08/standalone-operation-of-lucent-ks-24361.html

By October, he had a GPS board (Tria) that converted uBlox timing receiver output to the format desired by Lucent box (Motorola Oncore UT).
http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html
His last post in November 2015 was about dongles for the REF-0.
http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-rev-b-dongles.html

In 2016 he posted his later development work on OSHPark, but stopped Blog posting about a year ago. Anyone have an update? He has commented in past that he is easily distracted.

greg, w9gb

Sent from iPad Air

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

I don't live in New Zealand. :) Dan > On Jun 29, 2017, at 1:05 PM, Gregory Beat <w9gb@icloud.com> wrote: > > Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436 Ref-0 GPSDO project (standalone operation). > > Earlier this week, I noted Lucent KS-2436 units being sold on the TradeMe web site (New Zealand). Listing: 1356761279 and 1356761447 > http://www.trademe.co.nz/electronics-photography/other-electronics/other/auction-1356761279.htm > "I'm selling this gear (Lucent) as I don't have the time to complete this project. > I bought everything included brand new, but I can't provide any warranty." > --amc184 (seller) > === > My June 6, 2017 query/update. > -- > Starting in August 2015, Dan Watson (Sync Channel Blog) started a project to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u REF-0 for standalone operation (without the REF-1 module) > http://syncchannel.blogspot.com/2015/08/standalone-operation-of-lucent-ks-24361.html > > By October, he had a GPS board (Tria) that converted uBlox timing receiver output to the format desired by Lucent box (Motorola Oncore UT). > http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html > His last post in November 2015 was about dongles for the REF-0. > http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-rev-b-dongles.html > > In 2016 he posted his later development work on OSHPark, but stopped Blog posting about a year ago. Anyone have an update? He has commented in past that he is easily distracted. > > greg, w9gb > === > Sent from iPad Air > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

PS

paul swed

Fri, Jun 30, 2017 1:15 AM

Holy cow is that the Dan we know? I see from your blog you have moved on to
many other things. Was reading them today.
Regards
Paul
WB8TSL

On Thu, Jun 29, 2017 at 7:31 PM, Daniel Watson watsondaniel3@gmail.com
wrote:

I don't live in New Zealand. :)

Dan

On Jun 29, 2017, at 1:05 PM, Gregory Beat w9gb@icloud.com wrote:

Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436

Ref-0 GPSDO project (standalone operation).

Earlier this week, I noted Lucent KS-2436 units being sold on the

TradeMe web site (New Zealand). Listing: 1356761279 and 1356761447

http://www.trademe.co.nz/electronics-photography/other-

electronics/other/auction-1356761279.htm

"I'm selling this gear (Lucent) as I don't have the time to complete

this project.

I bought everything included brand new, but I can't provide any

warranty."

--amc184 (seller)

My June 6, 2017 query/update.

Starting in August 2015, Dan Watson (Sync Channel Blog) started a

project to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u
REF-0 for standalone operation (without the REF-1 module)

http://syncchannel.blogspot.com/2015/08/standalone-

operation-of-lucent-ks-24361.html

By October, he had a GPS board (Tria) that converted uBlox timing

receiver output to the format desired by Lucent box (Motorola Oncore UT).

http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html
His last post in November 2015 was about dongles for the REF-0.
http://syncchannel.blogspot.com/2015/11/denuo-gps-hits-

rev-b-dongles.html

In 2016 he posted his later development work on OSHPark, but stopped

Blog posting about a year ago. Anyone have an update? He has commented in
past that he is easily distracted.

greg, w9gb

Sent from iPad Air

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/

mailman/listinfo/time-nuts

and follow the instructions there.

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/
mailman/listinfo/time-nuts
and follow the instructions there.

Holy cow is that the Dan we know? I see from your blog you have moved on to many other things. Was reading them today. Regards Paul WB8TSL On Thu, Jun 29, 2017 at 7:31 PM, Daniel Watson <watsondaniel3@gmail.com> wrote: > I don't live in New Zealand. :) > > Dan > > > On Jun 29, 2017, at 1:05 PM, Gregory Beat <w9gb@icloud.com> wrote: > > > > Dan Watson (New Zealand) appears to have abandoned this Lucent KS-2436 > Ref-0 GPSDO project (standalone operation). > > > > Earlier this week, I noted Lucent KS-2436 units being sold on the > TradeMe web site (New Zealand). Listing: 1356761279 and 1356761447 > > http://www.trademe.co.nz/electronics-photography/other- > electronics/other/auction-1356761279.htm > > "I'm selling this gear (Lucent) as I don't have the time to complete > this project. > > I bought everything included brand new, but I can't provide any > warranty." > > --amc184 (seller) > > === > > My June 6, 2017 query/update. > > -- > > Starting in August 2015, Dan Watson (Sync Channel Blog) started a > project to develop a GPS board to "plug into" the Lucent KS-24361, RTFG-u > REF-0 for standalone operation (without the REF-1 module) > > http://syncchannel.blogspot.com/2015/08/standalone- > operation-of-lucent-ks-24361.html > > > > By October, he had a GPS board (Tria) that converted uBlox timing > receiver output to the format desired by Lucent box (Motorola Oncore UT). > > http://syncchannel.blogspot.com/2015/10/tria-gps-success-in-ref-0.html > > His last post in November 2015 was about dongles for the REF-0. > > http://syncchannel.blogspot.com/2015/11/denuo-gps-hits- > rev-b-dongles.html > > > > In 2016 he posted his later development work on OSHPark, but stopped > Blog posting about a year ago. Anyone have an update? He has commented in > past that he is easily distracted. > > > > greg, w9gb > > === > > Sent from iPad Air > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. >

time-nuts@lists.febo.com

Re: [time-nuts] Lucent RFTG-u REF-0 Standalone (Dan Watson)

My June 6, 2017 query/update.

greg, w9gb

My June 6, 2017 query/update.

greg, w9gb

My June 6, 2017 query/update.

greg, w9gb

--amc184 (seller)

My June 6, 2017 query/update.

greg, w9gb