Hi, How much would you be asking for this? Dan On 10/31/2016 12:00 PM, volt-nuts-request@febo.com wrote: > Message: 3 > Date: Mon, 31 Oct 2016 15:22:41 +0100 > From: Andrea Baldoni < > > To: volt-nuts@febo.com > Subject: [volt-nuts] FS: NOS Agilent 34401A > Message-ID: <20161031142241.GA27821@sol.ermione.com> > Content-Type: text/plain; charset=us-ascii > > Hello. > > Saturday I bought a 34401A. I was interested just in another instrument but > the seller insisted to sell them only together, so I had bought this one also. > > The condition is very good, it has been sold to me as NOS but I cannot be sure. > However, I checked calibration number and it's 35, means it has only the > initial factory calibration, date April 11 2001. It's complete with rubber and > handle, it's clean, without any scratch, display is bright, and everything is > like you should expect from a, if not really NOS, lightly used instrument. > > I would keep it, if I had not already other two of them in the same condition > in my lab, plus a switch unit with the same multimeter inside... so it will > not end on an auction site: I offer here to the group and if no one is > interested, I'll keep it. > > It's a US made Agilent marked version, with red and black binding posts (not > the previous all red ones) but still square power button and rectangular shift > key, software revision "11/05/02". Original paper User's guide and Service > guide are included, as well as a power cord, CD with Intuilink software, > original test lead kit still in the bag. The calibration certificate with > test report is missing, and I don't have original box. All the rest of the > standard accessories are there. > Of course, calibration is absolutely expired. I have not enough equipment to > verify if it's still inside limits in every range; besides that it seems to > work correctly. Other questions, just ask. > > Note: it's identical to the other two I have, except that they have initial > calibration two months earlier and serial some thousands lower. > I didn't upgrade their firmware (and I don't think user can do > it) thus the software revision date late than calibration is evidently > normal for this batch. > > I can eventually ship everywhere but I prefer to ship inside EU. > > You can send your (reasonable) offers via mail. > > Best regards, > Andrea Baldoni > > > ------------------------------ > > Subject: Digest Footer