>From the Zodiac binary message, mine reports 12 channels, software ver 93.07 from 01/16/04, hardware options 5843 (hex). ---------------------- > I think the firmware version is in one of the NMEA commands.

Thanks, sounds like the TU60-D120 series has a completely different firmware numbering system than the TU30-140/410 in the link below. I ordered one and hopefully it will be fine. Suspect they are newer versions than the TU30's http://www.jrmiller.demon.co.uk/projects/ministd/frqstd0.htm -=Bryan=- > From: holrum@hotmail.com > To: time-nuts@febo.com > Date: Thu, 16 Jun 2016 01:02:05 +0000 > Subject: [time-nuts] TU60-D120-131 Specs....? > > From the Zodiac binary message, mine reports 12 channels, software ver 93.07 from 01/16/04, hardware options 5843 (hex). > ---------------------- > > I think the firmware version is in one of the NMEA commands. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

Mark: Is there any trick in getting serial data from these units. I have my terminal program set to 4800 8N1 and the txd and rxd pins on the receiver connected through a TTL/RS232 converter to the PC. Can not get anything on the terminal screen. Scoping the TXD pin on the receiver and I see a burst of data at power up, but that is about it. Any help appreciated. -=Bryan=- > From: holrum@hotmail.com > To: time-nuts@febo.com > Date: Thu, 16 Jun 2016 01:02:05 +0000 > Subject: [time-nuts] TU60-D120-131 Specs....? > > From the Zodiac binary message, mine reports 12 channels, software ver 93.07 from 01/16/04, hardware options 5843 (hex). > ---------------------- > > I think the firmware version is in one of the NMEA commands. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.