Empathy List Archives

RS

Richard Solomon

Thu, Jan 4, 2018 4:09 PM

I have a dead T-Bolt that I want to trouble-shoot, but my only

Power Cable is in use, so I need another Power Cable.

Anyone have a spare that they are willing to part with ?

Thanks, Dick, W1KSZ

ps: I know I can buy the parts from Mouser, but I don't have

the proper Crimp Tool.

Sent from Outlookhttp://aka.ms/weboutlook

I have a dead T-Bolt that I want to trouble-shoot, but my only Power Cable is in use, so I need another Power Cable. Anyone have a spare that they are willing to part with ? Thanks, Dick, W1KSZ ps: I know I can buy the parts from Mouser, but I don't have the proper Crimp Tool. Sent from Outlook<http://aka.ms/weboutlook>

TV

Tom Van Baak

Thu, Jan 4, 2018 6:16 PM

I have a dead T-Bolt that I want to trouble-shoot, but my only

Power Cable is in use, so I need another Power Cable.

Anyone have a spare that they are willing to part with ?

Thanks, Dick, W1KSZ

You can improvise using any 0.1 inch headers you have lying around. See "Alternative Connectors" at:
http://leapsecond.com/pages/tbolt/power.htm

If you don't want to do that, contact me off-list [1] and I'll send you a ready-made power cable left over from the group buy years ago.

/tvb

[1] tvb@leapsecond.com

> I have a dead T-Bolt that I want to trouble-shoot, but my only > > Power Cable is in use, so I need another Power Cable. > > Anyone have a spare that they are willing to part with ? > > Thanks, Dick, W1KSZ You can improvise using any 0.1 inch headers you have lying around. See "Alternative Connectors" at: http://leapsecond.com/pages/tbolt/power.htm If you don't want to do that, contact me off-list [1] and I'll send you a ready-made power cable left over from the group buy years ago. /tvb [1] tvb@leapsecond.com

EG

Eric Garner

Thu, Jan 4, 2018 6:22 PM

I don't have a spare per se, but I could make you a screw-terminal to 6pin
molex cable if it would help. contact me off list if interested

-Eric

On Thu, Jan 4, 2018 at 8:09 AM, Richard Solomon w1ksz@outlook.com wrote:

I have a dead T-Bolt that I want to trouble-shoot, but my only

Power Cable is in use, so I need another Power Cable.

Anyone have a spare that they are willing to part with ?

Thanks, Dick, W1KSZ

ps: I know I can buy the parts from Mouser, but I don't have

the proper Crimp Tool.

Sent from Outlookhttp://aka.ms/weboutlook

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/
mailman/listinfo/time-nuts
and follow the instructions there.

--
--Eric

Eric Garner

I don't have a spare per se, but I could make you a screw-terminal to 6pin molex cable if it would help. contact me off list if interested -Eric On Thu, Jan 4, 2018 at 8:09 AM, Richard Solomon <w1ksz@outlook.com> wrote: > I have a dead T-Bolt that I want to trouble-shoot, but my only > > Power Cable is in use, so I need another Power Cable. > > > Anyone have a spare that they are willing to part with ? > > > Thanks, Dick, W1KSZ > > > ps: I know I can buy the parts from Mouser, but I don't have > > the proper Crimp Tool. > > > Sent from Outlook<http://aka.ms/weboutlook> > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > -- --Eric _________________________________________ Eric Garner

BK

Bob kb8tq

Thu, Jan 4, 2018 9:38 PM

Hi

Your typical junk PC has a number of the connectors you need in it
The wire gauge is normally “good enough” to allow them to be dropped
right into the job of powering a TBolt. PC’s are only one of many devices
that use the same stuff …. check your junk box.

Bob

On Jan 4, 2018, at 11:09 AM, Richard Solomon w1ksz@outlook.com wrote:

I have a dead T-Bolt that I want to trouble-shoot, but my only

Power Cable is in use, so I need another Power Cable.

Anyone have a spare that they are willing to part with ?

Thanks, Dick, W1KSZ

ps: I know I can buy the parts from Mouser, but I don't have

the proper Crimp Tool.

Sent from Outlookhttp://aka.ms/weboutlook

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Your typical junk PC has a number of the connectors you need in it The wire gauge is normally “good enough” to allow them to be dropped right into the job of powering a TBolt. PC’s are only one of many devices that use the same stuff …. check your junk box. Bob > On Jan 4, 2018, at 11:09 AM, Richard Solomon <w1ksz@outlook.com> wrote: > > I have a dead T-Bolt that I want to trouble-shoot, but my only > > Power Cable is in use, so I need another Power Cable. > > > Anyone have a spare that they are willing to part with ? > > > Thanks, Dick, W1KSZ > > > ps: I know I can buy the parts from Mouser, but I don't have > > the proper Crimp Tool. > > > Sent from Outlook<http://aka.ms/weboutlook> > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

time-nuts@lists.febo.com

Trimble Thunderbolt Power Cable Needed