On the chip with the "MX" marking on it, what f/w version does it show (usually v5.02 or v5.10)? I have a couple of CM3's configured for TAIP output, but I have the programs for switching them to TSIP or NMEA. ----------------------- > The module is basically a Trimble SveeSix-CM3 and is based on the 25040 board. It’s labeled 26889-81 so is a variant of the standard TSIP part. Can anyone help with a replacement? Exact replacement would be ideal of course, but even a standard CM3 would be useful - I’ve done other ‘conversions’ before.

Due to the stickers, I don’t see anything with MX on it, but I presume you mean the ROM. It has 28655-01 and V5.00 on it. The other model number is 26889-81, the -x1 kind of implies that it’s TSIP, and from sniffing the GPS traffic in a prior exercise, I can confirm that it is. > On Jan 16, 2017, at 7:42 PM, Mark Sims <holrum@hotmail.com> wrote: > > On the chip with the "MX" marking on it, what f/w version does it show (usually v5.02 or v5.10)? I have a couple of CM3's configured for TAIP output, but I have the programs for switching them to TSIP or NMEA. > > ----------------------- > >> The module is basically a Trimble SveeSix-CM3 and is based on the 25040 board. It’s labeled 26889-81 so is a variant of the standard TSIP part. Can anyone help with a replacement? Exact replacement would be ideal of course, but even a standard CM3 would be useful - I’ve done other ‘conversions’ before. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.