Empathy List Archives

time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

Re: [time-nuts] TAPR GPS kit end plates update

S-

Steve - Home

Mon, May 22, 2017 12:55 PM

Hi Fred,

Yes, got it and thanks!

Steve
WB0DBS

On May 21, 2017, at 10:47 PM, Frederick Bray fwbray@mminternet.com wrote:

Steve,

I assume that you received my payment? I sent it the day that you advised everyone of the total

Thanks.

Fred

On 5/21/2017 3:42 PM, Steve - Home wrote:
Jerry is making rapid progress with the machine work on the end plates and should be contacting those who have paid to provide you with the follow on postage cost.

After going through the weekend mail and a PayPal update today, there are still 10 people who haven't paid. That represents 40 plates we're holding. Please pay by Friday May 26 or we'll have to offer them to others. I've also had a couple of requests after the initial order had closed. If I have cancellations or no-pays I will first fill additional orders from those before looking at a second order. I don't think we'll get as good a discount on the second order, if there is one, as the quantity will be much smaller.

Here is some additional information from a list member who made the kits possible. There are clear lenses available for the LED holes that will dress up the front panel but are not necessary for proper operation in a lab or shop environment. The lenses are available from Mouser Electronics, part number 593-3220C, manufacturer's part number CMS322CTP. The retainer for the lens is Mouser part number 593-RNG268, manufacturer's part number RNG268. Lenses are $1.44 each in small quantities, retainers are $.26 in small quantities. You'll want 4 of each. You'll have to slightly enlarge each hole to accommodate the lenses. Again, these are not necessary for proper operation.

Steve
WB0DBS

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Fred, Yes, got it and thanks! Steve WB0DBS > On May 21, 2017, at 10:47 PM, Frederick Bray <fwbray@mminternet.com> wrote: > > Steve, > > I assume that you received my payment? I sent it the day that you advised everyone of the total > > Thanks. > > Fred > >> On 5/21/2017 3:42 PM, Steve - Home wrote: >> Jerry is making rapid progress with the machine work on the end plates and should be contacting those who have paid to provide you with the follow on postage cost. >> >> After going through the weekend mail and a PayPal update today, there are still 10 people who haven't paid. That represents 40 plates we're holding. Please pay by Friday May 26 or we'll have to offer them to others. I've also had a couple of requests after the initial order had closed. If I have cancellations or no-pays I will first fill additional orders from those before looking at a second order. I don't think we'll get as good a discount on the second order, if there is one, as the quantity will be much smaller. >> >> Here is some additional information from a list member who made the kits possible. There are clear lenses available for the LED holes that will dress up the front panel but are not necessary for proper operation in a lab or shop environment. The lenses are available from Mouser Electronics, part number 593-3220C, manufacturer's part number CMS322CTP. The retainer for the lens is Mouser part number 593-RNG268, manufacturer's part number RNG268. Lenses are $1.44 each in small quantities, retainers are $.26 in small quantities. You'll want 4 of each. You'll have to slightly enlarge each hole to accommodate the lenses. Again, these are not necessary for proper operation. >> >> Steve >> WB0DBS >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.