Demian

I found a pdf of the datasheet which I have sent separately. The part was used in, among other things, a JRL voltavider. I have a voltavider but the voltage reverence was lifted and replaced with something far worse. If you need I can dig it out and try to document the connections. No promises that it can happen soon. You may also be able to get details from http://www.ohm-labs.com/ who has acquired all of Julie's technology. Demian -----Original Message----- Date: Sat, 31 Mar 2012 08:07:04 +1100 From: "Steve Grady" <grady.steve@gmail.com> To: <volt-nuts@febo.com> Subject: [volt-nuts] Julie Research Labs Voltage Reference ZVR-506 Message-ID: <DDFCBC5303654E838D080314F16034AC@bfg9000> Content-Type: text/plain; charset="us-ascii" Fellow Volt-Nuts, I have in my possession a couple of Julie Research Labs ZVR-506 6V zener references that came out of some gear that was manufacturer in the 1970's. I have not been able to find detailed information on them only generalised specifications. Does anyone have and detailed information on the pin connections. It is a small cube 7/8 inch and uses a 9 pins on the base that fit a standard valve type socket. Thanks, Steve Grady Sydney Australia ------------------------------ _______________________________________________ volt-nuts mailing list volt-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts End of volt-nuts Digest, Vol 31, Issue 18 ***************************************** ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1913 / Virus Database: 2114/4905 - Release Date: 03/30/12