I installed LH Ver 5 and when I try to open it I get an error message: ke5fx.dyndns.org not found (code 11004) Was I supposed to install it in the old LH Folder ? Thanks, Dick, W1KSZ

I think I found the answer. It seems that two shortcuts found there way onto the screen. I just picked the wrong one. HOWEVER, how do I get it to open in Full Screen Mode ? I tried adding the /f command at the end, but it still opens in small screen mode / The O/S is Windows XP. Tnx, Dick, W1KSZ -----Original Message----- From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Richard W. Solomon Sent: Monday, December 12, 2016 12:45 PM To: time-nuts@febo.com Subject: [time-nuts] Lady Heather Ver 5 Problem I installed LH Ver 5 and when I try to open it I get an error message: ke5fx.dyndns.org not found (code 11004) Was I supposed to install it in the old LH Folder ? Thanks, Dick, W1KSZ _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.

Hmm, no, that shouldn't affect anything. Sounds like a DNS issue of some kind, presumably (but not necessarily) at your end. Try again? -- john, KE5FX Miles Design LLC > -----Original Message----- > From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of > Richard W. Solomon > Sent: Monday, December 12, 2016 11:45 AM > To: time-nuts@febo.com > Subject: [time-nuts] Lady Heather Ver 5 Problem > > I installed LH Ver 5 and when I try to open it I get an error message: > > > > ke5fx.dyndns.org not found (code 11004) > > > > Was I supposed to install it in the old LH Folder ? > > > > Thanks, Dick, W1KSZ > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > and follow the instructions there.

Dick I create a small batch and granted some of this can be done in the config file. I explicitly switch to the location I have LH in within the batch. Then do the following heather /1 /f /rxz /tz=-5est/edt The 1 is the comport f is full screen rxz is z3801 tz if the timezone offset. I have several batch files for different receivers and I have run several LHs at the same time. TBolt and Z3801 as examples. Though without looking at full screen the pix is useless. To the group. I have installed LH in the program folders of XP and also in other directories they all seem to work as long as I clearly tell LH the place to look. Regards Paul WB8TSL On Mon, Dec 12, 2016 at 8:11 PM, Richard W. Solomon <w1ksz@earthlink.net> wrote: > I think I found the answer. It seems that two shortcuts found there way > onto the screen. I just picked the wrong one. > > HOWEVER, how do I get it to open in Full Screen Mode ? I tried adding the > /f command at the end, but it still opens in small screen mode / > > The O/S is Windows XP. > > Tnx, Dick, W1KSZ > > -----Original Message----- > From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Richard > W. Solomon > Sent: Monday, December 12, 2016 12:45 PM > To: time-nuts@febo.com > Subject: [time-nuts] Lady Heather Ver 5 Problem > > I installed LH Ver 5 and when I try to open it I get an error message: > > > > ke5fx.dyndns.org not found (code 11004) > > > > Was I supposed to install it in the old LH Folder ? > > > > Thanks, Dick, W1KSZ > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. >

To the group. I have installed LH in the program folders of XP and also in other directories they all seem to work as long as I clearly tell LH the place to look. Regards Paul WB8TSL ========================================= Paul, with Windows-7 and later directory protections have been tightened, and the user is no longer set up with Administrative privilege, hence the need to install programs where write access is needed to the program's directory outside the Program Files (or equivalent) tree. Yes, Windows has work-rounds with virtual directories, but it's often more confusion than it's worth. It must be over 7 years now since I had an Administrator-level user account, and I've never missed it. There are easy ways to get the privileges when you need then, just for that one task. 73, David GM8ARV -- SatSignal Software - Quality software written to your requirements Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv